EN FR

Overview

The 3DPM0356-1 Switch module is used to monitor the supply line preventing downstream failure propagation and isolating the failure source to the functions of the upstream power distribution network.

The power sequencing requirements for complex digital components, including FPGAs, necessitate fast power down of the supply lines in order to avoid damage to the components.

When the 3DPM0356-1 Switch module detects an over-current event, the Switch module will switch off the downstream power supply line in order to protect loads. The current threshold level can be adjusted through an external resistor (RADJ). Re-powering of the system can be performed via two external inputs EN and OVP#, controlled by digital signals.

The Switch module, has been designed for Space applications and provides high reliability, radiation tolerance, a small form factor and mass. It features a SEL/SET LETth of 62.5 MeV.cm2/mg and a TID of 50 krad (Si).

Key features

  • Wide input voltage range: 3V to 12V

    Line currents up to 7A

    Low voltage drop (90mV @ 7A)

  • Fast switch-OFF time (20µs max) for over-current

    Two external control inputs (EN & OVP#)

  • Adjustable current threshold

    Capability to adjust startup time

  • Radiation Hardened by Design:

    TID > 50 krad(Si)

    SEL and SET > 60 MeV.cm²/mg

  • Operating temperature: -40°C / +105°C

  • 48-pin BGA  ; 1.27mm-pitch

     13 x 13 x 9.8 mm

Line Up

Line Up

Each 3D PLUS standard product and SiP solution are defined by a specific part number based on the part number decoder provided below. The ordering information consist as a minimum of the following 3 items for fully define a product:

  • The product’s Part Number
  • The temperature range
  • The quality grade

For High Reliability products or SiPs for Aerospace applications, a Source Control Drawing (SCD#) referenced 3DPA-xxxx is available for each product. It shall be used for its procurement in addition to other ordering information.

Computer, Power and SiP Products P/N Decoder

 

Product Part Number Description Package Temperature
SWITCH 3DPM0356 3V to 12V input voltage range and up to 7A

Fast switch-OFF time (20µs max)

BGA48 C, I, S

 

Documentation

Other technical documentation is available under request: Application notes, IBIS, RTL, Step and Mechanical file, Radiation Report.

Product Part Number Data Sheet
SWITCH 3DPM0356 Data Sheet PDF - 1162ko Télécharger