3D PLUS has more than 200,000 microelectronics components in space, and more than 20 years of flight heritage with no reported failure. Our Flight Heritage is expanding continuously with products launched in Space every month in LEO, MEO and GEO orbits, for deep space exploration missions, for satellite constellation fleets, and for governmental missions in Europe, America, and Asia. Our Flagship missions include Mars 2020, Mars Science Laboratory, Rosetta, New Horizons, Juno, OneWeb, AlphaSat, Sentinel, Ariane 5, ISS, Parker Solar Probe, Insight, and many more.
The 3DPM0356-1 Switch module is used to monitor the supply line preventing downstream failure propagation and isolating the failure source to the functions of the upstream power distribution network.
The power sequencing requirements for complex digital components, including FPGAs, necessitate fast power down of the supply lines in order to avoid damage to the components.
When the 3DPM0356-1 Switch module detects an over-current event, the Switch module will switch off the downstream power supply line in order to protect loads. The current threshold level can be adjusted through an external resistor (RADJ). Re-powering of the system can be performed via two external inputs EN and OVP#, controlled by digital signals.
The Switch module, has been designed for Space applications and provides high reliability, radiation tolerance, a small form factor and mass. It features a SEL/SET LETth of 62.5 MeV.cm2/mg and a TID of 50 krad (Si).
Wide input voltage range: 3V to 12V
Line currents up to 7A
Low voltage drop (90mV @ 7A)
Fast switch-OFF time (20µs max) for over-current
Two external control inputs (EN & OVP#)
Adjustable current threshold
Capability to adjust startup time
Radiation Hardened by Design:
TID > 50 krad(Si)
SEL and SET > 60 MeV.cm²/mg
Operating temperature: -40°C / +105°C
48-pin BGA ; 1.27mm-pitch
13 x 13 x 9.8 mm
Each 3D PLUS standard product and SiP solution are defined by a specific part number based on the part number decoder provided below. The ordering information consist as a minimum of the following 3 items for fully define a product:
For High Reliability products or SiPs for Aerospace applications, a Source Control Drawing (SCD#) referenced 3DPA-xxxx is available for each product. It shall be used for its procurement in addition to other ordering information.
Computer, Power and SiP Part Number Decoder
Fast switch-OFF time (20µs max)
Other technical documentation is available under request: Application notes, IBIS, RTL, Step and Mechanical file, Radiation Report.