EN FR
3D PLUS has more than 210,000 microelectronics components in space, and more than 25 years of flight heritage with no reported failure. Our Flight Heritage is expanding continuously with products launched in Space every month in LEO, MEO and GEO orbits, for deep space exploration missions, for satellite constellation fleets, and for governmental missions in Europe, America, and Asia. Our Flagship missions include Mars 2020, Mars Science Laboratory, Rosetta, New Horizons, Juno, OneWeb, AlphaSat, Sentinel, Ariane 5, ISS, Parker Solar Probe, Insight, and many more.
Request information
The Radiation Intelligent Memory Controller is a fully configurable DDR2/3/4 SDRAM memory controller IP core designed to work with 3D PLUS DDR2/3/4 memory modules to achieve radiation tolerance improvement. The RIMC contains all standard functions of a DDR2/3/4 memory controller for data width applications from 8b up to 144b. It includes also additional functions, such as Single Event Upset (SEU) mitigation and Single Event Functional Interrupt (SEFI) protection to be able to work in radiation environments. In addition to the memory controller IP within the RIMC IP core, the user can either select PHY IPs provided in the IP core or develop its own PHY IP.
High Performance SDRAM DDR controller
DDR PHY interface DFI 2.1 (DDR2/DDR3) and DFI 3.1 (DDR4) compliant
High speed (up to 1 200 Mhz for DDR4) memory controller
Configurable via AMBA user interface – compliant AXI/AHB/APB
Radiation Mitigation
TID Flip bit protection
SEU mitigation
SEFI Protection
Scrubbing for SEU and SERE corrections when enabled
Configurability- Flexibility
Selectable Hamming or Reed-Solomon Error Correction Code (ECC)
Configurable DDR ranks to increase memory capacity
Provides rank and bank management algorithms
Dynamically configurable via an 8-bit APB slave interface
Controller Bypass mode provides direct access to memories
Clock & ODT settings compatible with 3D PLUS modules
Selectable and/or auto-configurable DRAM refresh time
Configurable user data width
Each 3D PLUS standard product and SiP solution are defined by a specific part number based on the part number decoder provided below. The ordering information consist as a minimum of the following 3 items for fully define a product:
For High Reliability products or SiPs for Aerospace applications, a Source Control Drawing (SCD#) referenced 3DPA-xxxx is available for each product. It shall be used for its procurement in addition to other ordering information. Intellectual Property Part Number Decoder
Other technical documentation is available under request: IBIS, RTL, Step and Mechanical file, Radiation Report.
