3D PLUS has more than 200,000 microelectronics components in space, and more than 20 years of flight heritage with no reported failure. Our Flight Heritage is expanding continuously with products launched in Space every month in LEO, MEO and GEO orbits, for deep space exploration missions, for satellite constellation fleets, and for governmental missions in Europe, America, and Asia. Our Flagship missions include Mars 2020, Mars Science Laboratory, Rosetta, New Horizons, Juno, OneWeb, AlphaSat, Sentinel, Ariane 5, ISS, Parker Solar Probe, Insight, and many more.
Advanced high performance semiconductor devices can be sensitive to Single Event Effect (SEE) when exposed under radiation in the Space environment. Those events can lead at least to data corruption or in worst case to the self destruction of the device. Therefore, those SEE events shall be mitigated to ensure the relevant reliability and life time of the application. A safe design for a mission critical Space application shall include a mitigation device.
The 3DRC3508ES2861 is a 3-input, high-speed octal majority voter module with built-in triple redundancy. With the three 8-bit inputs used for majority voting, the module provides the result of the vote as an output, along with an error signal indicating if there is a difference between any of the input bits (also 8-bit).
Operating on a power supply range from 1.65 V to 5.5 V, the module can be used in any type of redundancy configuration, thanks to the cold sparing function.
The 3DRC3508ES2861 is immune to SET and SEL by design, and insensitive to SEU/MBU by process (CMOS IC), qualifying its use in the space environment. Its integration into digital systems improves reliability through the use of the TMR. This space-qualified module is ITAR-free.
Voltage supply range: 1.65 V to 5.50 V
Input voltage up to 5.5 V at any Vcc
Provides logic-level down translation to Vcc
Cold sparing capability
Internal power-on reset (POR) circuitry
Power savings & low dissipated power
Up to 100 Mbps data rate
13 ns maximum propagation delay at 3.3 V
Temperature Range -55°C / +125°C
TID > 30 krad(Si)
SEL LETth > 74.7 MeV.cm²/mg at +125°C
SET LETth > 74.7 MeV.cm²/mg at +125°C
Space quality grade
Technology proven for 15 to 18 years missions in Space
Worldwide delivery guarantee
Each 3D PLUS standard product and SiP solution are defined by a specific part number based on the part number decoder provided below. The ordering information consist as a minimum of the following 3 items for fully define a product:
For High Reliability products or SiPs for Aerospace applications, a Source Control Drawing (SCD#) referenced 3DPA-xxxx is available for each product. It shall be used for its procurement in addition to other ordering information.
Interfaces Part Number Decoder
four dual 3-input voter gates, with individual error outputs.
Up 100 Mbps data rate
Other technical documentation is available under request: Applications Notes, IBIS, RTL, Step and Mechanical file, Radiation Report.