| Click
below for information |
|
|
|
3D
PLUS is a Member of TEXAS INSTRUMENTS THIRD
PARTY NETWORK.
3D
PLUS Computer Modules architecture is designed
to fit a wide range of applications without any complementary
electronics. The typical 3D PLUS
module architecture embeds :
- A
High Performance Processor
- On-Module
Memory SRAM, SDRAM, FLASH, EEPROM
- I/O
Coprocessor embedding Host-Port Interface (HPI),
General-Purpose Timers, Serial Ports, Clock Generator
…and other various I/O features,
- IEEE
JTAG Standard 1149.1 Test Access Port,
- A
Single Power Supply.
These
modules allow operations execution at a such performance
rate to respond to a wide range of system applications
like image data processing, high speed network switching/monitoring
and other embedded applications requiring cost-effective
and high-performance processor programming challenges.
These modules also possess the operational flexibility
of high-speed controllers and the numerical capability
of array processors.
All
3D PLUS Modules are based on well
known industry standards processors and benefit from
a complete set of development tools, including : a
C compiler, an assembly optimizer to simplify programming
and scheduling, and a Windows debugging interface
for visibility into the source code execution.
The IEEE-1149.1 (JTAG) interface combined with the
Emulator Kits allows hardware and/or software developers
to debug and validate user application in real-time.
Moreover, 3D PLUS processor modules
benefit from a starter kit designed by 3D
PLUS and allowing fast software development
and easy hardware development at project beginning
in order to reduce the development lead time.
A technical support is also available from 3D
PLUS to get the highest benefit of 3D
PLUS products and technology
|
^
Top
| Part-Number |
Description
/ Features
|
Package |
| CMD21060P |
ANALOG
DEVICES 3DSP21060
Floating-Point, 33 MHz, 30 MIPS, 90 MFLOPS
4 Mb SRAM, 4 Mb FLASH
7 Sample-and-Hold Analog Channels + 16-Bit ADCPower-on
Reset and Clock
General purposes I/Os (serial links, parallel port,
…) |
PGA87 |
|
CMA21020P |
ATMEL
3DSP21020
Floating Point, 20 MHz, 20 MIPS, 60 MFLOPS
96 Kb PROM, 128 KWords fast SRAM, 32 Mb SRAM, 4 Mb
FLASH
Power-on Reset and Clock
General purposes I/Os (5 Mb/s and 10 Mb/s serial links,
parallel port, …) |
PGA223 |
| |
TEXAS
INSTRUMENTS TMS320C31
Fixed-Point, 50 MHz, 25 MIPS32 Mb SRAM, 256 Mb FLASH
Power-on Reset and Clock
General purposes I/Os (serial links, parallel port,
…) |
PGA100,
BGA256 |
| |
TEXAS
INSTRUMENTS TMS320C5510
Fixed-Point, 160-200 MHz, 400M MACs/s18 Mb SRAM, 512
Kb DPRAM, 32 Mb FLASH
12-Bit ADC
Power-on Reset and Clock
General purposes I/Os (serial links, parallel port,
…) |
PGA81 |
| CM320C60B3 |
TEXAS
INSTRUMENTS TMS320C6000
Floating Point, 100 MHz, 100 MIPS, 600 MFLOPS
1 Mb SRAM, 128 Mb SDRAM, 16 Mb FLASH
Power-on Reset and Clock
General purposes I/Os (serial links, parallel port,
…) |
BGA432 |
| |
MOTOROLA
POWER PC
Fixed-Point, 66 MHz, 85 MIPS
512 Mb SDRAM, 32 Mb FLASH,
Power-on Reset and Clock
General purposes I/Os (serial links, parallel port,
…) |
BGA324 |
|
XILINX
VIRTEX II
Intelligent
and Re-Configurable Radiation
Tolerant Memory Module
Up to 3 Gbit SDRam data Storage Capacity |
QFP144 |
^
Top
|
|
|
|
